Products Archive - Tata AutoComp Aftermarket Parts

50kW specifications	3 year warranty
CONNECTORS	CHadeMO and CCS (Type 1 or 2)
POWER	Up to 50kW
SUPPLY INPUT	380 - 480 V AC 3ø
SUPPLY FREQUENCY	50-60 Hz
IP RATING	IP65
EFFICIENCY	>92%
POWER FACTOR	0.99
OPERATING TEMPERATURE	-35 o C to 50 o C
NETWORK CONNECTION	3G and Gigabit Ethernet
RFID	MIFARE ISO/IEC14443A/B, ISO/IEC15693, ISO/IEC18000-3, FeliCa, NFC, EMV 2.0
COMMUNICATION PROTOCOL	OCPP 1.5 and 1.6J
WEIGHT	165 kg
ELECTRICAL PROTECTION	Short circuit; Over voltage: RCD
DIMENSIONS	2000(H) x 750(W) x 330(D) mm
FREIGHT	24 units per 20’ container
CERTIFICATION	CE, UL, CHAdeMO, RCM, FCC, IC

With the use of modern technology, sssisted by a well-developed infrastructural facility and advanced tools, we are highly indulged in offering premium extensive quality array of two Wheelers Air and Oil Filters. Provided filters are quality tested on varied parameters to ensure defect free and flawless variety. Making usage of supreme-class grade material and up-to-date amenities, these are manufactured with excellence and can be purchased from us in varied provisions.

FEATURES:

Exceptional finish
High Quality
Compact Design with Various Sizes
Precise, Advanced and Effective

Details

Control Cables

Control cables are important components of a vehicle, as they provide power, control, signal and data communication for all of a vehicles systems and equipment including safety systems such as ABS.They are used as extension cable.

We provide wire and cable products for the commercial and recreational vehicle that can withstand harsh conditions and substances, including heat, mechanical stresses, chemicals, moisture and oil. Control cables include accelerator, brake and clutch cables.

Details

Brake Pads

Brake Pads are a very important part of Brake System, every time we brake; it is the pad which rubs against the rotating rotor to give the braking force for stopping the vehicle. As Brake Pads wear out with every braking they are one of the fastest moving replacement parts for vehicles. As a system supplier with expertise in the entire range of Auto Components, we are aware that Brakes are a safety product and are continuously engaged in research and development to keep itself aligned with the growing customer requirement for efficient and safe Braking. Brake pads are a component of disc brakes used in automotive and other applications. Brake pads are steel backing plates with friction material bound to the surface that faces the disk brake rotor. Brake pads convert the kinetic energy of the car to thermal energy by friction. Two brake pads are contained in the brake caliper with their friction surfaces facing the rotor. When the brakes are hydraulically applied, the caliper clamps or squeezes the two pads together into the spinning rotor to slow/stop the vehicle. When a brake pad is heated by contact with a rotor, it transfers small amounts of friction material to the disc, turning it dull gray. The brake pad and disc (both now with friction material), then "stick" to each other, providing the friction that stops the vehicle.

Details

Brake Shoes

A brake shoe is the part of a braking system which carries the brake lining in the drum brakes used on automobiles, or the brake block in train brakes and bicycle brakes. The brake shoe carries the brake lining, which is riveted or glued to the shoe. When the brake is applied, the shoe moves and presses the lining against the inside of the drum. The friction between lining and drum provides the braking effort. Energy is dissipated as heat. Modern cars have disc brakes all round, or discs at the front and drums at the rear. An advantage of discs is that they can dissipate heat more quickly than drums so there is less risk of overheating. The reason for retaining drums at the rear is that a drum is more effective than a disc as a parking brake.

Details

Dickey Shockers

In our wide range of products, we supply a wide range of Dicky Shockers. The offered products are widely used in various automobile industries and are known for optimum quality standards, reliable performance and accurate dimensions. Further, the products are available at industry leading prices.

We manufacture dicky shockers using optimum quality raw material and are used in various automobiles. These parts are precision designed and engineered in compliance with the international standards. Further, these products have a wide usage in trucks, buses and four wheelers with optimum shock absorbing feature. These are known for their durability and reliable performance.

Details

Filters (Air, Oil (Lube) and Fuel)

Engineered to even filter minute particles of air taken in, ensuring sufficient air supply and engine performance.A clean air filter also equates to better gas mileage, which means more money in one’s pocket. The amount of money laid out to purchase a new air filter is well worth it and pays for itself several times over in gas savings. All air filters are made of a thin material, just like dust masks. These are typically paper or cloth, although foam filters exist as well. Older cars that have carburetors typically take a circular air filter, whereas fuel-injected vehicles generally use flat rectangular air filters. The air filter is considered part of the fuel supply system. Fuel (either gasoline or diesel) is what a vehicle’s engine runs on, and getting the fuel from the tank to the engine is a complex process. The fuel system consists of the gas tank, carburetor or fuel injector, intake manifold, throttle body, as well as various pumps, filters (not just the air filter but also the fuel filter), gaskets, and other parts. The intake of air to the engine is mixed with the gasoline in a specific ratio to burn most efficiently.

Details

Suspension Parts

Air suspension system for front and rear:

Front: Parabolic springs - Independent front suspension
Rear air suspension
- - 4 bag system
  - 2 bag system
  - Cow-horn suspension: For ultra low floor, low floor, high deck bus applications
  - HA4 - 4 bag suspension system

Details

Radiators

An engine has numerous moving parts, and where there is movement there is friction. Friction creates heat. Motor oil is pumped throughout the engine block to provide some lubrication, but it isn't enough to overcome all of this excess heat energy. As a result, parts of the engine become boiling hot as part of normal operations. This is where the radiator system comes into play. The engine block must be kept relatively cool to avoid serious problems like overheating and seizure. If the pistons cannot slide freely in their cylinders due to excessive friction, they will eventually snap and cause total engine failure. To prevent this from happening, a mixture of water and anti-freeze is pumped through chambers in the engine block to absorb the excess heat and draw it away from vital areas.

Details

Mirrors, Glass, Plates

A rear-view mirror is a mirror in automobiles and other vehicles, designed to allow the driver to see rearward through the vehicle's backlight (rear windshield or windscreen). In cars, the rear-view mirror is usually affixed to the top of the windshield on a double-swivel mount allowing it to be adjusted to suit the height and viewing angle of any driver and to swing harmlessly out of the way if impacted by a vehicle occupant in a collision. The rear-view mirror is augmented by one or more side-view mirrors, which serve as the only rear-vision mirrors on motorcycles and bicycles.

Details

Grease

The characteristic feature of greases is that they possess a high initial viscosity, which upon the application of shear, drops to give the effect of an oil-lubricated bearing of approximately the same viscosity as the base oil used in the grease.Grease is sometimes used to describe lubricating materials that are simply soft solids or high viscosity liquids, but these materials do not exhibit the shear-thinning (thixotropic) properties characteristic of the classical grease. A true grease consists of an oil and/or other fluid lubricant that is mixed with a thickener, typically a soap, to form a solid or semisolid. Greases are a type of shear-thinning or pseudo-plastic fluid, which means that the viscosity of the fluid is reduced under shear. After sufficient force to shear the grease has been applied, the viscosity drops and approaches that of the base lubricant, such as the mineral oil.

Details

Gear Oils

Gear oil is a lubricant made specifically for transmissions, transfer cases, and differentials in automobiles, trucks, and other machinery. It is of a higher viscosity to better protect the gears and usually is associated with a strong sulfur smell. The high viscosity ensures transfer of lubricant throughout the gear train. This is necessary since the devices needing this heavy oil do not have pumps for transferring the oil with only a portion of the lowermost gears bathed in an oil sump.

Details

DC-DC-Chargers For EV

2 Wheeler Filter

FEATURES:

Control Cables

Brake Pads

Brake Shoes

Dickey Shockers

Filters (Air, Oil (Lube) and Fuel)

Suspension Parts

Air suspension system for front and rear:

Radiators

Mirrors, Glass, Plates

Grease

Gear Oils