- AC Chargers
- DC Chargers
AC CHARGER
22kW Model | 32Amps | Type 2 Single / Single Connector
- IP Grade: 54/65
- RFID system: Universal
- Communication Protocol: With or Without OCPP 1.6J
- Communication Mode: Ethernet (Standard), 3G/4G/WIFI (Optional), Bluetooth
- Meter Accuracy: 1%
- User Interface: with LED indication or with 7’’ Touch Screen
- Working Temp: (-)30℃ to 55℃
- Installation Type: Pedestal
- Industry Standard: EN 61851-1:2011, EN 61000-6-1:2007, EN 61000-6-3:2007/A1:2011/AC:2012
- Certification: CE
- Safety: Over Current, Short Circuit, Surge Protection, Leakage Current Protection
- Relative Humidity: 5% ~ 95% Non-Condensing
- Altitude: ≤ 2000m
| Model No. | TP-EVVA-380-1F | ||
| Charging Connector No. | 1 | ||
| Electrical | Rated Voltage | 400 VAC | |
| Input Voltage Range | 400±20% | ||
| Operation Frequency | 50/60Hz | ||
| Output Voltage Range | Same as input | ||
| Rated Current | 32A | ||
| Output Current Range | 6~32A | ||
| Rated Output Wattage | 22kW | ||
| Safety | Protective Functions | Emergency Stop Button | Supports |
| Short Circuit | Supports | ||
| Overcurrent | 34A | ||
| Overvoltage | ≥400+20% VAC | ||
| Undervoltage | ≤400-30%VAC | ||
| Surge Protection | Supports | ||
| Overtemperature | ≥55℃ （Calibration based on test results） | ||
| Ground and L, N reverse connection | Supports | ||
| Relay sticking detection | Supports | ||
| Vehicle end diode anomaly detection | Supports | ||
| Leakage | Built-in Type-B RCMU | ||
| Start-up | RFID card | Supports | |
| Environmental adaptability | Operation Temp | -10℃ ～ +55 ℃ | |
| Storage Transport Temp. | -40℃～+80℃ | ||
| Altitude | ≤2000m | ||
| Humidity | ≤95% no condensation | ||
| HMI | LED Indicators | Supports | |
| Display | 4.3-inch (English) | ||
| Communications Support | Ethernet | Supports | |
| 4G | Supports | ||
| WIFI | dual frequency WIFI ： 2.4G, 5.8G | ||
| Physical Property | Materials | PC | |
| IP Class | IP65 | ||
| IK Class | IK10 | ||
| Connector mechanical operating life | ≥10000 times | ||
| Output Connector | Type 2 | ||
| Standard Charging Cable Length | 5m | ||
| Installation Type | Wall mount | ||
| Other | Remote software update | Supports | |
| Diagnostic capabilities/data monitoring | Supports | ||
| RFID | ISO 14443A/B, ISO 15693 Standard | ||
| Energy Calculation | Yes | ||
| OCPP1.6J | Yes | ||
7.4 kW Model | 32Amps | Type 2 Single / Single Connector 
- IP Grade: 54/65
- RFID system: Universal
- Communication Protocol: With or Without OCPP 1.6J
- Communication Mode: Ethernet (Standard), 3G/4G/WIFI (Optional), Bluetooth
- Meter Accuracy: 1%
- User Interface: with LED indication or with 7’’ Touch Screen
- Working Temp: (-)30℃ to 55℃
- Installation Type: Pedestal
- Industry Standard: EN 61851-1:2011, EN 61000-6-1:2007, EN 61000-6-3:2007/A1:2011/AC:2012
- Certification: CE
- Safety: Over Current, Short Circuit, Surge Protection, Leakage Current Protection
- Relative Humidity: 5% ~ 95% Non-Condensing
- Altitude: ≤ 2000m
| Charging Connector No. | 1 | ||
| Electrical | Rated Voltage | 230AC | |
| Input Voltage Range | 230±20% | ||
| Operation Frequency | 50/60Hz | ||
| Output Voltage Range | Same as input | ||
| Rated Current | 32A | ||
| Output Current Range | 6~32A | ||
| Rated Output Wattage | 7kW | ||
| Safety | Protective Functions | Emergency Stop Button | Supports |
| Short Circuit | Supports | ||
| Overcurrent | 34A | ||
| Overvoltage | ≥265VAC | ||
| Undervoltage | ≤190VAC | ||
| Surge Protection | Supports | ||
| Overtemperature | ≥55℃（Calibration based on test results） | ||
| Ground and L, N reverse connection | Supports | ||
| Relay sticking detection | Supports | ||
| Vehicle end diode anomaly detection | Supports | ||
| Leakage | Built-in Type-B RCMU | ||
| Start-up | RFID card | Supports | |
| Environmental adaptability | Operation Temp | -10℃～+55℃ | |
| Storage Transport Temp. | -40℃～+80℃ | ||
| Altitude | ≤2000m | ||
| Humidity | ≤95% no condensation | ||
| HMI | LED Indicators | Supports | |
| Display | 4.3-inch (English) | ||
| Communications Support | Ethernet | Supports | |
| 4G | Supports | ||
| WIFI | dual frequency WIFI：2.4G, 5.8G | ||
| Physical Property | Materials | PC | |
| IP Class | IP65 | ||
| IK Class | IK10 | ||
| Connector mechanical operating life | ≥10000 times | ||
| Output Connector | Type 2 | ||
| Standard Charging Cable Length | 5m | ||
| Installation Type | Wall mount | ||
| Other | Remote software update | Supports | |
| Diagnostic capabilities/data monitoring | Supports | ||
| RFID | ISO 14443A/B, ISO 15693 Standard | ||
| Energy Calculation | Yes | ||
| OCPP1.6J | Yes | ||
DC FAST CHARGER
60KW (150VDC to 750VDC)
TP-EVPD-750 Series 
TP-EVPD-750 Series
- DC Fast Charger with Single / Dual / Triple Connectors
- Charges Two Vehicles – Simultaneously
- High-Performance, Low Maintenance Networked Electric Vehicle Charging Stations
- Touch Screen Display with Voltage/Current/Time etc Information.
- Wider voltage range from 150VDC – 550VDC
- Compatible with present and future EVs
- OCPP 1.6J Compliant, Inbuilt RFID Reader
- Optional Credit Card Reader
- Protection for Overcurrent, Over voltage and under voltage, Ground fault, Surge protection,
- Protective Earthing, Leakage current monitor protection
- CE Certified Design
| Input Supply | |
|---|---|
| Input supply | 415VAC +/- 10% Or 480VAC +/- 5% (3P + N + PE) |
| Frequency | 50 Hz / 60 Hz |
| Output voltage | 200 – 750VDC |
| Output current | 0 to 140 Amps |
| Rated power | 60 KW |
| Efficiency | > 95% at nominal output power |
| Power factor | >0.98 |
| Working temperature | -30℃ to 55℃ |
| Storage temperature | -30℃ to 60℃ |
| Altitude | < 2000m / 6500 ft |
| Working Humidity | ≤95% RH, Non-condensing |
| Storage Humidity | ≤99%RH, Non-condensing |
| Display | 7’’ touch screen |
| RFID system | ISO/IEC 14443 A/B |
| Dimensions (L x D x H) | 650 x 485 x 1850 mm |
| Weight | ~240 Kgs |
| Protective Class | IP54 |
| Cooling system | Air cooling fans |
| Connectors | Combination of CCS / GBT / CHAdeMO ( Single / Dual / Triple ) |
| DC Charge System-1 | CCS – Mode 4, IEC-61851, ISO-15118, DIN SPEC 70121 |
| DC Charge System-2 | GBT – Mode 4,GB/T18487 2015, GB/T20234 2015, GB/T27930 2015 |
| DC Charge System-3 | CHAdeMO 1.1 or 1.2 |
| Length of charging cable | 5m (standard) |
| Network connection | Ethernet |
| Interface protocol | OCPP 1.6 |
| Optional | Credit Card Reader, 3G/4G/Wifi Modem |
| Certifications | CE certified |
| Electrical Protections | |
| Protection 1 | RCD 30mA Type A circuit breaker |
| Protection 2 | The Surge Protector(20kA) |
| Protection 3 | Ungrounded alarm |
| Protection 4 | Can Turn off the output power supply when the output is short circuited |
| Emergency Stop | Can Turn off the output power supply with emergency stop button. |
120KW CCS2 Dual (200 VDC to 750 VDC)
TP-EVPD-750 Series 
TP-EVPD-750 Series
- DC Fast Charger with Dual Connectors
- Charges Two Vehicles – Simultaneously
- High-Performance, Low Maintenance Networked Electric Vehicle Charging Stations
- Touch Screen Display’s the information like Voltage, Current, KWH, Total time of charge, SOC, Remaining time to full charge, etc.
- Compatible with present and future EVs
- Wider voltage ranges from 200VDC – 750VDC – Can charge EV Buses and Trucks
- OCPP 1.6J Compliant, Inbuilt RFID Reader
- Protection for Overcurrent, Over voltage and under voltage, Ground fault, Surge protection,
- Protective Earthing, Leakage current
- Screen password protection
- CE Certified Design
| Input Supply | |
|---|---|
| Frequency | 50 Hz +/-5% |
| Output voltage | 200 – 750VDC |
| Output current | 0 to 200 Amps |
| Rated power | 1x120kW or 2x60kW |
| Efficiency | > 95% at nominal output power |
| Power factor | >0.98 |
| Working temperature | -20℃ to 60℃ |
| Storage temperature | -20℃ to 60℃ |
| Altitude | < 2000m / 6500 ft |
| Working Humidity | ≤95% RH, Non-condensing |
| Storage Humidity | ≤99%RH, Non-condensing |
| Display | 7’’ touch screen |
| RFID system | ISO/IEC 14443 A/B |
| Dimensions (L x D x H) | 800 x 750 x 1900 mm |
| Weight | ~380 Kgs |
| Protective Class | IP54 |
| Cooling system | Air cooling fans |
| Connectors | CCS (Dual) |
| DC Charge System 1 | CCS – Mode 4, IEC-61851, ISO-15118, DIN SPEC 70121 |
| Length of charging cable | 5m (standard) |
| Network connection | Ethernet |
| Interface protocol | OCPP 1.6 |
| Optional | 3G/4G/WIFI Modem |
| Certifications | CE certified |
| Electrical Protections | |
| Protection 1 | RCD 30mA Type A circuit breaker |
| Protection 2 | The Surge Protector(20kA) |
| Protection 3 | |
| Protection 4 | Can Turn off the output power supply when the output is short circuited |
| Emergency Stop | Can Turn off the output power supply with emergency stop button. |
160KW CCS2 Dual (200 VDC to 750 VDC)
TP-EVPD-750 Series 
TP-EVPD-750 Series
- DC Fast Charger with Dual Connectors
- Charges Two Vehicles – Simultaneously
- High-Performance, Low Maintenance Networked Electric Vehicle Charging Stations
- Touch Screen Display’s the information like Voltage, Current, KWH, Total time of charge, SOC, Remaining time to full charge, etc.
- Compatible with present and future EVs
- Wider voltage ranges from 200VDC – 750VDC – Can charge EV Buses and Trucks
- OCPP 1.6J Compliant, Inbuilt RFID Reader
- Protection for Overcurrent, Over voltage and under voltage, Ground fault, Surge protection,
- Protective Earthing, Leakage current
- Screen password protection
- CE Certified Design
| Input Supply | |
|---|---|
| Frequency | 50 Hz +/-5% |
| Output voltage | 200 – 750VDC |
| Output current | Upto 200 Amps on single gun | Upto 120 Amps on each gun |
| Rated power | 1x160kW or 2x80kW |
| Efficiency | > 95% at nominal output power |
| Power factor | >0.98 |
| Working temperature | -20℃ to 60℃ |
| Storage temperature | -20℃ to 60℃ |
| Altitude | < 2000m / 6500 ft |
| Working Humidity | ≤95% RH, Non-condensing |
| Storage Humidity | ≤99%RH, Non-condensing |
| Display | 7’’ touch screen |
| RFID system | ISO/IEC 14443 A/B |
| Dimensions (L x D x H) | 800 x 750 x 1900 mm |
| Weight | ~400 Kgs |
| Protective Class | IP54 |
| Cooling system | Air cooling fans |
| Connectors | Dual GB/T standard |
| DC Charge System 1 | Mode 4, GB/T18487 2015, GB/T20234 2015, GB/T27930 2015 |
| Length of charging cable | 5m (standard) |
| Network connection | Ethernet |
| Interface protocol | OCPP 1.6 |
| Optional | 3G/4G/WIFI Modem |
| Certifications | CE certified |
| Electrical Protections | |
| Protection 1 | RCD 30mA Type A circuit breaker |
| Protection 2 | The Surge Protector(20kA) |
| Protection 3 | |
| Protection 4 | Can Turn off the output power supply when the output is short circuited |
| Emergency Stop | Can Turn off the output power supply with emergency stop button. |
200KW (200 VDC to 750 VDC)
TP-EVPD-750 Series 
TP-EVPD-750 Series
- DC Fast Charger with Dual Connectors
- Charges Two Vehicles – Simultaneously
- High-Performance, Low Maintenance Networked Electric Vehicle Charging Stations
- Touch Screen Display’s the information like Voltage, Current, KWH, Total time of charge, SOC, Remaining time to full charge, etc.
- Compatible with present and future EVs
- Wider voltage ranges from 200VDC – 750VDC – Can charge EV Buses and Trucks
- OCPP 1.6J Compliant, Inbuilt RFID Reader
- Protection for Overcurrent, Over voltage and under voltage, Ground fault, Surge protection,
- Protective Earthing, Leakage current
- Monitor protection
- CE Certified Design
| Input Supply | |
|---|---|
| Frequency | 50 Hz +/-5% |
| Output voltage | 200 – 750VDC |
| Output current | Upto 200 Amps on single gun | Upto 150 Amps on each gun |
| Rated power | 1x180kW or 2x100kW |
| Efficiency | > 95% at nominal output power |
| Power factor | >0.98 |
| Working temperature | -20℃ to 60℃ |
| Storage temperature | -20℃ to 60℃ |
| Altitude | < 2000m / 6500 ft |
| Working Humidity | ≤95% RH, Non-condensing |
| Storage Humidity | ≤99%RH, Non-condensing |
| Display | 7’’ touch screen |
| RFID system | ISO/IEC 14443 A/B |
| Dimensions (L x D x H) | 800 x 750 x 1900 mm |
| Weight | ~430 Kgs |
| Protective Class | IP54 |
| Cooling system | Air cooling fans |
| Connectors | Dual GB/T standard/ CCS2 Dual Connector |
| DC Charge System 1 | Mode 4, GB/T18487 2015, GB/T20234 2015, GB/T27930 2015 |
| CCS – Mode 4, IEC-61851, ISO-15118, DIN SPEC 70121 | |
| Operating Modes | 1. One EV with Two Inlets – Full Power |
| 2. Two different EVs – Half Power each | |
| 3. One EV with one inlet – Full Power | |
| Length of charging cable | 5m (standard) |
| Network connection | Ethernet |
| Interface protocol | OCPP 1.6 |
| Optional | 3G/4G/WIFI Modem |
| Certifications | CE certified |
| Electrical Protections | |
| Protection 1 | RCD 30mA Type A circuit breaker |
| Protection 2 | The Surge Protector(20kA) |
| Protection 3 | |
| Protection 4 | Can Turn off the output power supply when the output is short circuited |
| Emergency Stop | Can Turn off the output power supply with emergency stop button. |
